Hallo Leute,

habe mir ein Temperaturmodul TSM 125 (Art.Nr.1114430) von HTronic gekauft.
Das Modul funktioniert wunderbar! Jetzt habe ich in der Anleitung gelesen, dass man die Temperaturwerte auch auslesen kann.

Ich möchte gerne diese Werte mit einem Arduino UNO R3 auswerten und weiter verarbeiten.

Versuche die ganze Zeit schon vernünftige Werte über die Schnittstelle auszulesen, das klappt aber nicht!

Habe ein LCD-Display am Arduino angeschlossen, welches mir auch mittels serieller Schnittstelle übertragene Werte anzeigt.
Wenn ich aber den TSM 125 anschliesse kommen nur komische Zeichen auf dem Display an.
Im Seriellen Monitor zeigt er Zahlen an
Ich kriege aber die im HEX-Format übermittelten Werte nicht in Dezimalwerte umgewandelt.
Weis einer wie das geht?

Hier mein Sketch:
/*
LiquidCrystal Library - Serial Input

Demonstrates the use a 16x2 LCD display. The LiquidCrystal
library works with all LCD displays that are compatible with the
Hitachi HD44780 driver. There are many of them out there, and you
can usually tell them by the 16-pin interface.

This sketch displays text sent over the serial port
(e.g. from the Serial Monitor) on an attached LCD.

The circuit:
* LCD RS pin to digital pin 12
* LCD Enable pin to digital pin 11
* LCD D4 pin to digital pin 5
* LCD D5 pin to digital pin 4
* LCD D6 pin to digital pin 3
* LCD D7 pin to digital pin 2
* LCD R/W pin to ground
* 10K resistor:
* ends to +5V and ground
* wiper to LCD VO pin (pin 3)

Library originally added 18 Apr 2008
by David A. Mellis
library modified 5 Jul 2009
by Limor Fried (http://www.ladyada.net)
example added 9 Jul 2009
by Tom Igoe
modified 22 Nov 2010
by Tom Igoe

This example code is in the public domain.

http://arduino.cc/en/Tutorial/LiquidCrystalSerial
*/

// include the library code:
#include <LiquidCrystal.h>

// initialize the library with the numbers of the interface pins
LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
int analogValue=0;
char temp;
void setup(){
// set up the LCD's number of columns and rows:
lcd.begin(16, 2);
// initialize the serial communications:
Serial.begin(1200);
}

void loop()
{
// when characters arrive over the serial port...
if (Serial.available()) {
// wait a bit for the entire message to arrive
delay(100);
// clear the screen
lcd.clear();
// read all the available characters
while (Serial.available() > 0) {
// display each character to the LCD
analogValue=Serial.read();
temp=Serial.read();

Serial.println(analogValue);
Serial.println("#####");// zum testen eingefügt, wird auch angezeigt

lcd.setCursor(0,0);
lcd.print(temp);
lcd.setCursor(0,1);
lcd.print("Test");// zum testen eingefügt, wird auch angezeigt
}
}
}